Tile Leveling Clips Manufacturer & Wholesale Supplier
Professional 100% virgin PP tile leveling clips. 0.5–5.0mm joint widths. Break-off design. Factory-direct wholesale.
Tile leveling clips are the single-use base of a clip-and-wedge system: 11 break-off models in 100% virgin PP cover 0.5–5.0mm joints on 3–30mm tiles. Pick the base width from the grout joint and the model from tile thickness. Wholesale: MOQ 500 bags of 100 pcs, FOB Ningbo $0.47–0.85/bag, bulk production in 15–25 days after sample approval, with OEM colors and private-label packaging.
Tile Leveling Clips Models — Choose Your Size
Find models that fit your tile and grout joint
Enter the tile-body thickness and required grout-joint width to narrow the catalog models.
11 catalog models available. Add one or both dimensions to narrow the list.
BM-B01
Dimensions: 37×25×40mm
Tile Thickness: 3–14mm
Spacer Options:
- 1.0mm → 3.4g/pcs
- 1.5mm → 3.43g/pcs
- 2.0mm → 3.5g/pcs
- 3.0mm → 3.6g/pcs
Compatible wedges: BM-A01–BM-A05
Packing reference
- 1.5 mm · standard Inner pack 100 pcs · Master carton 30 packs · Reference pack weight 330 g · N.W. / G.W. 10.2 kg / 11.2 kg · Carton size 56×38×35 cm
Standard dual-hole clip
BM-B04 break-force demonstration: all 5 recorded samples
One filmed sample was tested for each thickness. Peak readings ranged from 28.1 to 41.7 kgf (275.6–408.9 N).
| Clip thickness | Recorded peak kgf | Recorded peak N | n |
|---|---|---|---|
| 1.0 mm | 28.1 | 275.6 | 1 |
| 1.5 mm | 29.0 | 284.4 | 1 |
| 2.0 mm | 37.1 | 363.8 | 1 |
| 2.5 mm | 37.7 | 369.7 | 1 |
| 3.0 mm | 41.7 | 408.9 | 1 |
Method: AILIGU digital force gauge; hand-operated tensile fixture; retained peak after separation.
Source and scope: ZEBRA internal video dated 2026-10-07; 100% virgin PP; dataset 2026-10-15.1, reviewed 2026-10-15.
These are single-sample demonstration results, not batch averages, minimum guarantees or acceptance limits.
Tile Leveling Clips Technical Specifications
| Model | Dimensions | Tile Thickness | Spacer Options | Weight Range |
|---|---|---|---|---|
| 37×25×40mm | 3–14mm | 1.0mm, 1.5mm, 2.0mm, 3.0mm | 3.4g – 3.6g | |
| 35.5×22.4×39.3mm | 3–14mm | 1.0mm, 1.5mm, 2.0mm, 3.0mm | 2.2g – 2.5g | |
| 36×25×40mm | 3–14mm | 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm | 2.4g – 2.73g | |
| 35×25×35mm | 3–14mm | 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm | 1.5g – 1.96g | |
| 37×25×40mm | 3–14mm | 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.5mm | 2.33g – 3g | |
| 36×22.8×49mm | 14–24mm | 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm | 2.44g – 3.04g | |
| 38×23.7×39.4mm | 3–14mm | 1.0mm, 1.5mm, 2.0mm, 3.0mm | 3.3g – 3.8g | |
| 20×20×30mm | 3–12mm | 1.0mm, 1.5mm | 1.2g | |
| 23.8×15.3×33mm | 3–14mm | 0.5mm, 0.7mm, 1.0mm, 1.5mm, 2.0mm | 1g – 1.2g | |
| 21×21×43.4mm | 3–10mm | 0.8mm, 1.0mm, 1.5mm, 2.0mm | 0.8g – 1g | |
| 38×34×61mm | 20–30mm | 1.0mm, 1.5mm, 2.0mm, 3.0mm, 5.0mm | 3.7g – 4.5g |
Tile Leveling Clips for Wholesale & Bulk Orders — Factory-Direct Pricing
ZEBRA TOOLS makes all 11 clip models in Wenzhou, China and sells them wholesale by the bag: 100 clips per bag, MOQ 500 bags per model and joint width, and an FOB Ningbo guide price of $0.47–0.85/bag at MOQ.
50,000 clips per model × joint-width line.
Per 100-piece bag at MOQ, FOB Ningbo.
Bags per order; tier prices are quoted on request.
Bulk production after the sample is approved.
Buyer pays DHL freight, credited against the first bulk order; kits leave in 3–5 days.
30% deposit, 70% before shipment. FOB Ningbo by default; CIF or EXW Wenzhou on request.
How a clip order is built
- Choose the model by tile thicknessBM-B01–B05, B07 and B09 cover 3–14mm tile, BM-B06 14–24mm and BM-B11 20–30mm.Open the model selector →
- Choose the joint widthsEach model × joint width is one order line of at least 500 bags: BM-B01 in 1.5mm and 2.0mm is two lines, 1,000 bags in total.
- Add wedges and pliersOrder wedges at one per three clips (MOQ 500 bags) and pliers from 100 pcs.Tile leveling clips and wedges →
500 bags of clips + 500 bags of wedges = $590–$905 FOB Ningbo; 100 pliers add $110–150.
Standard packing is 100 clips per bag in a model-specific master carton (select a model above to see its carton).
Full terms for every product line are on the tile leveling system wholesale page; resellers can also apply to the tile leveling system distributor program.
⚖️ Guide prices are FOB Ningbo at MOQ and subject to raw material cost fluctuations — contact us for current pricing. (price book updated 2026-11-19)
OEM Availability for Tile Leveling Clips
Private-label packaging and custom colors are available for ZEBRA tile leveling clips. All clips use 100% virgin PP. Custom clip geometry or a molded product logo requires model-specific mold review.
Custom packaging
Branded bags, retail boxes or pails from 3,000 bags; custom bag printing adds $0.01–0.08 per bag. Send the model, bag count and artwork.
Custom color
Any Pantone color from 5,000 bags per color. Production follows the approved color sample.
Custom mold
Custom geometry or a molded logo needs new or modified tooling: send a drawing or sample for a mold plan. 3D design to T1 sample takes 15–25 days.
OEM bulk production runs 15–25 days after the sample is approved.
Choose the next step for your clip order
Use the model quote for a defined specification, request samples for fit testing, or ask a short question on WhatsApp.
Tile Leveling Clips Applications & Buyers — Contractors, Distributors & Importers
Suitable for: Distributors / Importers / Wholesalers / Private Label Brands
What Tile Leveling Clips Control — and What They Cannot Fix
- The selected grout-joint width
- Adjacent tile-edge alignment during cure
- Repeatable wedge position and tension
- A designed break-off point below the joint
- An uneven or out-of-tolerance substrate
- Warped or bowed tile bodies
- Insufficient mortar coverage or voids
- Wrong cure time or removal direction
Recommended Accessories
Use a wedge for the same tile range: BM-A01–A05 fit the 3–14mm clips, BM-A06 fits BM-B08/BM-B10, BM-A07 fits BM-B09
Speed up wedge insertion and ensure consistent pressure
Stocking the full system? Compare clips, wedges and pliers side by side on the tile leveling clips and wedges page.
How to Use Tile Leveling Clips — Step-by-Step Guide
Step 1: Apply Thin-Set Mortar
Spread thin-set mortar on the substrate using a notched trowel. Ensure even coverage across the entire tile area. For large-format tiles (60×60cm+), back-butter each tile for maximum adhesion.
Step 2: Insert the Clip Under the Tile
Slide the leveling clip base under the tile edge before setting it down. Position one clip every 20–30cm along each edge. For corners, place clips approximately 5cm from the corner on both sides.
Step 3: Press Tile Firmly Into Place
Press the tile down firmly onto the thin-set bed. The clip strap should protrude through the grout joint. Verify the strap is centered in the joint and not pinched by the tile edge.
Step 4: Insert the Wedge and Tighten
Insert the wedge through the clip opening and push firmly until snug. Use tile leveling pliers to apply controlled pressure — the wedge will pull the clip strap upward, leveling adjacent tiles to the same plane.
Step 5: Follow the Cure and Removal Instructions
Use the mortar manufacturer’s cure guidance and the selected clip system’s removal instructions; there is no universal 24-hour rule. Remove the reusable wedge as directed, then break the clip in the specified direction along the grout joint and clear the joint before grouting.
Frequently Asked Questions
What is the MOQ for wholesale tile leveling clips?
MOQ starts at 500 bags for standard tile leveling clips (100 pcs/bag). Custom colors MOQ is 5,000 bags per color; private label packaging MOQ is 3,000 bags. For larger orders, the exact price tier is stated in the written quote.
Are your tile leveling clips compatible with other brands of wedges?
Compatibility is model-specific. Before mixing brands, check the opening, geometry, working travel and removal method with physical samples.
Which tile leveling clip size should I choose?
Choose two specifications separately: the clip base width must match the required grout joint, while the model tile-capacity range must include the actual tile-body thickness. Standard BM-B01 to BM-B05 and BM-B07 models cover 3–14mm tiles; BM-B06 covers 14–24mm. See the tile leveling clip thickness guide for the complete model table, then use a wedge listed for the same tile range — BM-A01–BM-A05 fit the 3–14mm clips. Installation steps: how to use tile leveling clips; what each part does: what are tile leveling clips.
What are tile leveling clip sizes in inches (1/16, 1/8)?
ZEBRA joint widths are metric and none is an exact inch size. Nearest matches: 1/32″ (0.79mm) → 0.8mm on BM-B10; 1/16″ (1.59mm) → 1.5mm on all 11 models; 3/32″ (2.38mm) → 2.5mm on BM-B03–BM-B06; 1/8″ (3.18mm) → 3.0mm on BM-B01–BM-B07 and BM-B11; 3/16″ (4.76mm) → 4.5mm on BM-B05 or 5.0mm on BM-B11. Where a specification calls for an exact fractional joint, approve a sample against it before ordering.
How many tile leveling clips do I need per square meter?
For 60×60cm tiles, place 4 clips per tile — about 11 clips per m². For 12×24-inch tiles, that is about 22 clips per m². One MOQ of 500 bags (100 pcs per bag = 50,000 clips) covers roughly 4,500 m² of 60×60 tile, or about 2,250 m² of 12×24 tile before project contingency. Do not apply a universal wastage percentage; set contingency from the placement drawing, cut edges, openings, pattern junctions and documented site loss. For other tile sizes, use our tile clip calculator for a planning estimate.
Can I customize the color of tile leveling clips?
Yes. We offer Pantone color matching for wholesale orders. Custom color MOQ starts at 5,000 bags per color. Standard colors (white, blue, red, yellow, black) are available from stock with no MOQ premium.
What material are the clips made from?
All ZEBRA tile leveling clips use 100% virgin PP. Batch material documentation can be provided when agreed. Confirm the resin grade, additives, break-force target and temperature requirement against the approved sample and order specification.
Do you offer free samples before bulk purchase?
Yes. Product samples are free for qualified B2B buyers. The buyer pays DHL courier freight, and that courier charge is credited against the first bulk order.
How long does wholesale delivery take?
Samples leave the factory in 3–5 days; bulk production takes 15–25 days after sample approval; a custom mold takes 15–25 development days and costs $2,000–8,000.
Which tile leveling clips work for 10mm thick tiles?
9 of the 11 models cover 10 mm tile: BM-B01, BM-B02, BM-B03, BM-B04, BM-B05, BM-B07, BM-B08, BM-B09, BM-B10. The full range covers 3–30 mm tile.
Which tile leveling clips work for 20mm thick tiles?
BM-B06 covers 14–24mm tile bodies, while BM-B11 covers 20–30mm. At exactly 20mm, both ranges include the tile; choose the required joint width and confirm the clip-and-wedge fit with a physical sample. BM-B11 publishes 1.0mm, 1.5mm, 2.0mm, 3.0mm and 5.0mm bases. MOQ 500 bags.


