Buyer evidence

Tile Leveling Quality Control

This page gives importers and private-label buyers a documented control path for tile leveling tools. ZEBRA connects the approved sample, model and thickness checks, packing verification, batch records and shipment release without treating a certificate as proof of every production claim.

Records reviewed October 5, 2026

Quick Answer
5 release gates on every order, 99.9% on-time delivery

Each order passes 5 gates: approved reference, material and model identity, dimensions and function, packing and carton reconciliation, then release, rework or rejection. A 2-person QC team runs pre-shipment checks (dimensions, break point, visual sorting) and every raw-material batch gets a melt flow index test. On-time delivery is 99.9% (Alibaba.com store data); ISO 9001 certificate OKC1QS24452.

01Approved reference
02Material and model identity
03Dimensions and function
04Packing and carton reconciliation
05Release, rework or rejection
01

Five control gates from sample to shipment

Freeze the approved product and packaging reference first. Check incoming material and model identity, verify production dimensions and function, reconcile packed quantity and carton marks, then release only against the agreed inspection record.

02

Records buyers can request

Every order file contains 8 records: the approved sample reference, purchase order, packing specification, sampled measurements, bag and carton counts, batch or date code, packed-lot photos and the final pass, rework or reject decision.

03

Acceptance is set in the purchase order

The order passes against the AQL limits and dimensions written in the purchase order; a certificate or photo supports that inspection record but does not replace it.

Sampling: ISO 2859-1, general inspection level II

Default acceptance limits: AQL 0 for critical, 2.5 for major and 4.0 for minor defects, unless the purchase order sets other limits. AQL 2.5 means the worst tolerable process average is 2.5% major-defective units.

Lot size (pcs)Code letterSample size (pcs)
501–1,200J80
1,201–3,200K125
3,201–10,000L200
10,001–35,000M315

Example: a 5,000-piece lot is code letter L — 200 pieces are inspected, and the lot passes with 0 critical, no more than 10 major and no more than 14 minor defects.

Source: ISO 2859-1 / ANSI/ASQ Z1.4 level II tables as published by qualityinspection.org and V-Trust, retrieved 2026-11-06.

6 certificates with number, scope and validity

DocumentNumberScopeValid
ISO 9001:2015OKC1QS24452Quality management system · Manufacture and sale of ceramic tile laying tools2024-11-22 → 2027-11-21
RoHSB-R03025E3984Uncoupling membrane · BM-S01–BM-S05 · EN IEC 63000:20182026-05-15 → 2029-05-15
RoHSB-R03025E3985BM-B / BM-A / BM-P / BM-F / BM-D / BM-E series · EN IEC 63000:20182026-05-15 → 2029-05-15
CE · 2006/42/ECB-S03025E3982Suction cup · BM-K01–BM-K32, BM-K35 · EN ISO 12100:20102026-05-15 → 2029-05-15
CE · 2006/42/ECCE-1105-01-2911221.0 / 1.5 / 2.0 / 2.5 / 3.0mm · EN ISO 12100:20102022-11-29 → 2027-11-29
RoHSB-R03025E3983Suction cup · BM-K series · EN IEC 63000:20182026-05-15 → 2029-05-15

Published test data: BM-B04 clip break force

ThicknessPeak load (kgf)Peak load (N)
1.0mm28.1275.6
1.5mm29.0284.4
2.0mm37.1363.8
2.5mm37.7369.7
3.0mm41.7408.9

One filmed sample per thickness, AILIGU digital force gauge, tested 2026-10-07. Separate record: BM-K02 suction cup pull test peak 244.3 kgf (2,395.8 N), single supplied result.

Frequently asked questions

Which certificates does ZEBRA hold?

ISO 9001:2015 certificate OKC1QS24452 (valid November 22, 2024 to November 21, 2027) for the manufacture and sale of ceramic tile laying tools, and RoHS file B-R03025E3985 covering the BM-B, BM-A, BM-P, BM-F, BM-D and BM-E series (EN IEC 63000:2018, valid May 15, 2026 to May 15, 2029).

What material are ZEBRA leveling clips made from?

100% virgin PP for all 11 clip models, BM-B01 to BM-B11. Wedges are PP or PE by model.

Is there published test data for the clips?

Yes. A video-recorded single-sample pull test of BM-B04 clips broke at 28.1 kgf (1.0mm) to 41.7 kgf (3.0mm); the dataset is published on the industry reports page as CSV, JSON and XLSX.

What is checked before an order ships?

5 release gates: approved reference sample, material and model identity, dimensions and function, packing and carton reconciliation, then release, rework or reject.

Buyer evidence

Define the acceptance file before production

Send the models, thicknesses, packaging and inspection criteria that must appear on your order record.
Discuss your orderOEM/ODM service